Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 10
Part: Headlight

This guide briefly outlines the steps to remove and replace the front headlight of the Yamaha MT-10 motorcycle. First, place the motorcycle on a stand and begin removing the small side plastic fairings by unscrewing the screws; then unscrew the fixing screws of the front headlight, which are located on its sides, as shown in the video. At this point, disconnect the electrical connectors to remove and replace the optical unit with the new one; connect the headlight and reassemble everything, following the video tutorial to the end!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the brake pads of the Yamaha MT-10?
How do you replace the brake pads of the Yamaha MT-10?
Mt 10 In order to replace the brake pads of the Yamaha MT-10, you need to loosen the screws that fix the calipers to their respective housings located on t…
How to replace the motor oil in the Yamaha MT-10?
How to replace the motor oil in the Yamaha MT-10?
Mt 10 In this tutorial we can see how to replace the engine oil in the Yamaha MT-10, a very simple and quick operation. First of all, make sure that the en…
How to Change the Engine Oil in the Yamaha MT-10?
How to Change the Engine Oil in the Yamaha MT-10?
Mt 10 In this tutorial, learn how to change the engine oil in the Yamaha MT-10, a very simple and quick operation. First, ensure the engine is sufficiently…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos