Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Yamaha R6

Model: Yamaha Yamaha R 6
Part: Engine oil

Video tutorial

In this tutorial, we will see how to change the engine oil in a Yamaha R6, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container under the bike and detach the lower left fairing.

Next, locate the drain bolt, unscrew it using a 17mm socket, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the upper hole.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Yamaha R6
How to Change the Engine Oil on a Yamaha R6
Yamaha R 6 Start by placing your Yamaha R6 on a central motorcycle stand, then start the engine and let it idle. After a couple of minutes, turn off the engine …
How to Change the Engine Oil in a Yamaha R6?
How to Change the Engine Oil in a Yamaha R6?
Yamaha R 6 .. In this tutorial, see how to change the engine oil in a Yamaha R6, a very simple and quick operation. First, wait until the.. …
How to Change the Engine Oil in a Yamaha R6?
How to Change the Engine Oil in a Yamaha R6?
Yamaha R 6 In this tutorial, we will see how to change the engine oil in the Yamaha R6, a very simple and quick operation. First, ensure the engine is sufficien…

How to Reset the Service Light on a Honda PCX 150 Scooter

In this tutorial, you will see how to reset the service light on a Honda PCX 150 scooter, a very simple and quick operation to be performed only after completing all scheduled maintenance tasks. First, insert the key and leave it in the initial position, then press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the ignition. Keep the button pressed until the service light goes out, then restart the ignition to verify that the operation was successful.

Watch the video!


by ScegliAuto

More videos