Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Rdx
    4. : Checks and maintenance

Acura Rdx - Checks and maintenance

Acura Rdx (2019-2024 / MK 3)
How to reset the multimedia system in the Acura RDX?
In this tutorial, we can see how to reset the multimedia system in the Acura RDX, an extremely simple and fast operation to be carried out, for example, in …read all…
Posted on 28 October 2023 by ScegliAuto
Acura Rdx (2019-2024 / MK 3)
How to reset the oil light in Acura RDX?
There are two methods to reset the oil light in your Acura RDX. The first consists in using the display integrated in the dashboard and, using the wheel …read all…
Posted on 7 April 2023 by ScegliAuto
Acura Rdx (2013-2018 / MK 2)
How to reset the oil service in the Acura RDX?
In this tutorial we can see how to reset the oil service in the Acura RDX, a very simple and fast operation, to be carried out only after completing all the …read all…
Posted on 3 May 2024 by ScegliAuto
Roof Rack Bars (1) Battery (3) Spark plugs (1) Key (8) -board computer (1) Checks and maintenance (3) Air filter (4) Cabin air filter (1) Oil filter (1) Accessory Kit (1) Light bulb (1) Headlight bulb (1) License plate light (1) Door panel (2) Front bumper (1) Brake pads (1) Instrument cluster (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos