Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Acura Tlx
    4. : Checks and maintenance

Acura Tlx - Checks and maintenance

Acura Tlx (2015-2020 / MK 5)
How to reset the service in Acura TLX?
In this tutorial, we can see how to reset the service in the Acura TLX. Before performing this simple and quick operation, we must have completed all the …read all…
Posted on 23 May 2023 by ScegliAuto
Acura Tlx (2021-2024 / MK 6)
How to reset the oil service on the Acura TLX?
In this tutorial, we can see how to reset the oil service in the Acura TLX, a very simple operation to be carried out only after completing all the required …read all…
Posted on 23 April 2023 by ScegliAuto
Acura Tlx (2015-2020 / MK 5)
How to reset the engine oil life percentage on the Acura TLX Mk5.
The guide shows how to reset the engine oil life of the Acura TLX Mk5. The first step is to turn on the dashboard by pressing the ignition button twice. Using …read all…
Posted on 14 April 2023 by ScegliAuto
Battery (5) Key (5) -board computer (1) Checks and maintenance (3) Headlight (1) Tail light (1) Air filter (2) Cabin air filter (4) Grille (1) Engine oil (2) Front bumper (2) Brake pads (1) Door (1) Instrument cluster (1) Manufacturer's coat of arms (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos