Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rlx
    4. : How to activate the air conditioning system in the rear compartment of the Acura RLX.

Acura Rlx - Video tutorial

Model: Acura Rlx KC2, KC1 - Years 2014-2020
Part: Air conditioning
Operation: How to activate the air conditioning system in the rear compartment of the Acura RLX.

To activate the air conditioning system in the rear part of the Arcura Rlx cabin, simply operate the vents located between the two front seats but facing towards the back of the cabin. As you can see from the video, the controls regulate various functions. The dial allows you to set the temperature of the air conditioning (the red dashes allow you to adjust the hot air, while the blue ones adjust the cold air). Below the two vents, you will find three buttons that activate the air conditioning and control the intensity of the air flow. In this way, the two areas of the cabin remain independent.


Posted on 15 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos