Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Interior lights ceiling light bulb

Alfa Romeo Giulietta - Interior lights ceiling light bulb

Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the ceiling light of the Alfa Romeo Giulietta.
In today's video, we will see how to replace the interior ceiling light in the Alfa Romeo Giulietta. Specifically, we will learn how to install the restyling …read all…
Posted on 6 August 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the lights in the interior ceiling light of the Alfa Romeo Giulietta.
In this short and simple guide, we will see the steps that will allow us to disassemble and replace the lights of the interior ceiling light of the Alfa Romeo …read all…
Posted on 8 July 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the interior light bulb on the Alfa Romeo Giulietta?
In order to replace the internal light bulb of the Alfa Romeo Giulietta, it is necessary to pry it so that the ceiling light located in the central part of the …read all…
Posted on 12 September 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the Alfa Romeo Giulietta interior ceiling light bulbs
In this video tutorial we will see how to remove and replace the light bulbs of the passenger compartment of the Alfa Romeo Giulietta. First of all we get on …read all…
Posted on 24 April 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the sun visor bulb on an Alfa Romeo Giulietta
Before starting, we will have to enter the front part of the cockpit of our Alfa Romeo Giulietta. Let's start by lowering the sun visor. Then disengage and …read all…
Posted on 20 February 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the courtesy lights (of the door) on the Alfa Romeo Giulietta
Let's find out in this tutorial how to remove and replace the courtesy lights or the lights that we find under the door on an Alfa Romeo Giulietta, following …read all…
Posted on 20 February 2024 by ScegliAuto
Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos