Do it yourself
Frequently asked questions about cars and motorcycles

Alfa Romeo Giulietta - Air Vents

Alfa Romeo Giulietta (2010-2020 / MK 1)
Disassembly of the Alfa Romeo Giulietta dashboard air diffuser

Let's find out in this guide the procedure necessary for the disassembly and replacement of the dashboard air vents of the Alfa Romeo Giulietta. First we get …read all…
Posted on 22 April 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you remove the right air vent on the Alfa Romeo Giulietta?

In order to remove the right air vent on the Alfa Romeo Giulietta, the glovebox must be opened and the rubber cap removed with a flat-blade screwdriver. Under …read all…
Posted on 23 February 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to remove the air vent on an Alfa Romeo Giulietta

Let's see in this video how to remove the air vents on an Alfa Romeo Giulietta placed on the sides of the central dashboard. Let's start by removing the trim …read all…
Posted on 19 November 2023 by ScegliAuto

Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos