Do it yourself
Frequently asked questions about cars and motorcycles

Alfa Romeo Giulietta - Shocks

Shocks Alfa Romeo Giulietta (2010-2020 / mk 1)

Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the front shock absorbers on the Alfa Romeo Giulietta

How to replace the front shock absorbers on the Alfa Romeo Giulietta? The shock absorbers in question are SACHS gas ones (a good brand for the Giulietta). …Read all…
Posted on 18 July 2026 by ScegliAuto

Accelerator (1) Airbag (4) Alternator (2) Shocks (1) Antenna (1) Car stereo (9) Battery (5) Air vents (4) Transmission (2) Spark plugs (1) Body (5) Glove compartment (3) Control unit (2) Key (6) Trunk lock (1) Timing belt (8) Air conditioner (1) A/C controls (1) Onboard computer (4) Checks and maintenance (15) Dashboard (6) Shifter boot (2) Brake rotors (2) Side marker light (1) Headlight (15) Tail light (1) Fog lights (5) Diesel particulate filter (1) Air filter (6) Cabin air filter (12) Fuel filter (1) Diesel fuel filter (3) Oil filter (2) Parking brake (2) Clutch (2) Grille (1) A/C system (1) Window switch (1) Light bulb (5) Side marker bulb (1) Headlight bulb (20) Tail light bulb (6) Interior dome light bulb (6) Instrument panel light (1) License plate light (7) (3) Handle (12) Trim cover (2) Engine oil (4) Clock (11) Door trim panel (15) Front bumper (3) Rear bumper (2) Brake pads (2) Shift knob (7) Car door (2) Instrument cluster (1) Radiator (1) Heater control valve (1) Fuse box (19) Seat (4) Crankshaft position sensor (1) Door lock (1) Brake system (1) Side mirror (4) Rearview mirror (1) Warning light – error code (9) (3) Tire pressure warning light (1) Service warning light (23) Manufacturer emblem (3) Fuel cap (6) Thermostat (2) Cylinder head (1) Center console tunnel (2) EGR valve (3) Blower motor (3) Steering wheel (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos