Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Gear Shift Knob

Alfa Romeo Giulietta - Gear Shift Knob

Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the gear knob in the Alfa Romeo Giulietta?
In this tutorial, we can see how to replace the gear knob in the Alfa Romeo Giulietta, an extremely simple and fast operation. First of all, let's go inside …read all…
Posted on 28 September 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the gear knob in the Alfa Romeo Giulietta?
In this tutorial, we can see how to replace the gear knob in the Alfa Romeo Giulietta, a very simple and quick operation. Let's start by going inside the …read all…
Posted on 20 September 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the gear knob on the Alfa Romeo Giulietta?
In order to replace the gear knob on the Alfa Romeo Giulietta, it will be necessary to pry in the groove that divides the lower part of the knob from the upper …read all…
Posted on 18 December 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to change the gear knob on Alfa Romeo Giulietta
If you are looking for a video on how to change the gear knob of your Alfa Giulietta in DIY, you are in the correct video. It is an operation that requires a …read all…
Posted on 1 April 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to change the gear knob on the Alfa Romeo Giulietta
In today's video tutorial we will see how to disassemble and replace the gear knob on the Alfa Romeo Giulietta, following these simple steps. First we get in …read all…
Posted on 23 February 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the Alfa Romeo Giulietta gear knob
In this video tutorial we will see how to remove and replace the Alfa Romeo Giulietta gear knob. First of all we get on board the car and with a flat …read all…
Posted on 8 February 2024 by ScegliAuto
Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos