Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Alfa Romeo Giulietta - Handle

Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the internal handle of the Alfa Romeo Giulietta?
In order to replace the internal handle of the Alfa Romeo Giulietta, you need to loosen the screws that fix the door panel so that it can be removed from its …read all…
Posted on 14 October 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the external handle of the Alfa Romeo Giulietta?
In order to replace the external handle of the Alfa Romeo Giulietta, you need to open the door so that you can detach the protective cover located on the side …read all…
Posted on 20 September 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the internal handle of the Alfa Romeo Giulietta?
The replacement of the internal handle of the Alfa Romeo Giulietta is carried out by removing the cap located in the seat of the internal handle and loosening …read all…
Posted on 1 May 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the right rear door handle of the Alfa Romeo Giulietta
Replacing the rear door handle of the Giulietta is not at all easy. Our youtuber warns of this in the first minutes of the video. This is because the piece we …read all…
Posted on 24 August 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the inside handle of the Alfa Romeo Giulietta?
In order to replace the internal handle of the Alfa Romeo Giulietta it is necessary to remove the cap located in the seat of the internal handle and loosen the …read all…
Posted on 20 August 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to remove the door handle of the Alfa Romeo Giulietta
For this guide, the procedure for removing and replacing the door handle for the Alfa Romeo Giulietta will be illustrated. Here are the steps that need to be …read all…
Posted on 18 May 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
Replacing the handle on Alfa Romeo Giulietta
We begin to disassemble the upper triangle where the mirror is, use a plastic device to avoid damaging the panel by scratching it. Now always with the plastic …read all…
Posted on 13 May 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the interior door handle of the Alfa Romeo Giulietta
The door opening of the Alfa Romeo Giulietta could break; therefore to replace it independently you can proceed as follows: you can also order the handle via …read all…
Posted on 11 March 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
Removal of the external door handle on the Alfa Romeo Giulietta
In this short and simple video, let's see the instructions needed to remove and replace the external front door handle on the Alfa Romeo Giulietta. First we …read all…
Posted on 22 February 2024 by ScegliAuto
Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos