Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Rear light bulb

Alfa Romeo Giulietta - Rear light bulb

Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the license plate light on your Alfa Romeo Giulietta
To replace the number plate light bulbs, follow these simple steps: use a pointed object to lever the short side of the bulb holder located above the number …read all…
Posted on 27 December 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the reverse light bulb on an Alfa Romeo Giulietta?
In order to replace the reverse light bulb on the Alfa Romeo Giulietta, you need to open the tailgate, so that you can remove the plastic cover located on the …read all…
Posted on 8 December 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
Replacement of Alfa Romeo Giulietta rear fog and reverse lights
In this video we see how to replace the rear fog lights and reverse of the Alfa Romeo Giulietta. First step, we open the tailgate and remove the plastic cover …read all…
Posted on 18 March 2024 by ScegliAuto
Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos