Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Engine oil

Alfa Romeo Giulietta - Engine oil

Alfa Romeo Giulietta (2010-2020 / MK 1)
How to reset the oil service on the Alfa Romeo Giulietta?
In this tutorial we can see how to reset the oil service in the Alfa Romeo Giulietta, an extremely simple and quick operation. Before proceeding, we must have …read all…
Posted on 13 May 2024 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How do you replace the engine oil in the Alfa Romeo Giulietta?
In order to replace the motor oil of the Alfa Romeo Giulietta, you need to loosen the screws that secure the engine guard plate located at the bottom of the …read all…
Posted on 26 October 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the burnt oil of the Alfa Giulietta.
Replacing the burnt engine oil of the Alfa Giulietta is a very simple operation that can be carried out independently in your garage. First, you need to lift …read all…
Posted on 7 May 2023 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace the Alfa Romeo Giulietta oil and oil filter
To change the oil and the oil filter on an Alfa Romeo Giulietta we start by removing the lower engine guard (only one part), place a container under the sump, …read all…
Posted on 11 August 2022 by ScegliAuto
Alfa Romeo Giulietta (2010-2020 / MK 1)
How to replace oil and filters on Alfa Romeo Giulietta
How to replace oil and filters on Alfa Romeo Giulietta? Let's see how to proceed with the replacement: open the car door and pull up the engine compartment …read all…
Posted on 10 November 2023 by ScegliAuto
Accelerator (1) Airbags (3) Alternator (1) Shock absorbers (1) Car stereo (7) Battery (5) Air Vents (3) Gearbox (2) Carburetor (1) Bodywork (1) Glove box (3) Control unit (2) Key (3) Locking the trunk (1) Timing belt (6) Air conditioning controls (1) -board computer (6) Checks and maintenance (31) Dashboard (3) Gearshift gaiter (1) Brake discs (2) Side indicator light (1) Headlight (12) Tail light (1) Fog lights (4) Particulate filter (2) Air filter (3) Cabin air filter (7) Petrol filter (1) Diesel filter (1) Oil filter (1) Hand brake (1) Grille (1) Window lift switch (1) Light bulb (4) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (3) Interior lights ceiling light bulb (6) Dashboard light (1) License plate light (6) Third brake light (2) Rear window (1) Handle (9) Mask (1) Engine oil (5) Door panel (12) Front bumper (3) Rear bumper (1) Brake pads (2) Gear Shift Knob (6) Door (2) Instrument cluster (2) Radiator (1) Cockpit heating cock (1) Fuse box (14) Seat (4) Brake system (1) Outside rearview mirror (4) Manufacturer's coat of arms (2) Thermostat (1) Engine head (1) Central tunnel (2) EGR valve (2) Interior blower (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos