Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Burnt Oil in the Alfa Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Engine oil

Video tutorial

Replacing burnt engine oil in the Alfa Giulietta is a very simple task that you can perform in the comfort of your garage. First, lift the vehicle to access the oil sump.

To remove the oil sump, you will need to unscrew the 12mm bolt that secures it. Once the bolt is removed, position a container and let the oil drain out. When there is no more oil dripping, replace the plug. Note: It is important to clean the plug thoroughly, as it contains a magnet that attracts all the particles that damage the oil. As shown in the video, it is also important to maintain other components of the car, such as the breather hose and various filters.

Returning to the engine oil, simply lower the car from the stand and pour the new oil into the designated top-up hole.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to replace the oil filter and engine oil of the Alfa Romeo Giulietta
How to replace the oil filter and engine oil of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will explain how to replace the engine oil and oil filter of the Alfa Romeo Giulietta. Lift the front part of the vehicle and place a contai…
How to replace the air filter on the Alfa Romeo Giulietta
How to replace the air filter on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) The steps to replace the air filter of the Alfa Romeo Giulietta are simple and quick to perform independently. To replace the filter, we must first r…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos