Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Strap Tow installation on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Accessory Kit
Operation: Strap Tow installation on Alfa Romeo 147

If you want to give your car a sportier, almost racing look, you can install a Strap Tow: it is practically a towing strap, typical of racing cars, since it allows a quick and ready gripping point to attach them. and remove them from the race course in the event of a breakdown or accident; it is installed in correspondence with the seat of the normal tow hook, or in the appropriate hole in the front bumper and is fixed with a pin in the same threaded hole; it may be necessary to slightly widen the hole and remove the bumper for a more correct fixing.


Posted on 1 November 2023 by ScegliAuto



How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m
How do you replace the brake button in the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) This video shows how to replace the button on the handbrake lever. The car used in this clip is an Alfa Romeo 147, but the same procedure is also val

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos