Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the intercooler hose on an Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Air filter
Operation: How to replace the intercooler hose on an Alfa Romeo 147

Let's see how to replace the intercooler hose on an Alfa Romeo 147. We remove the engine soundproofing panel; remove the right cover of the sleeve (as shown in the video) and unscrew the metal clamp placed around the suction sleeve at both ends with a screwdriver. Now we connect the sleeve disassembled earlier and screw the locking pins of the metal clamps around the sleeve. We carry out the assembly of the right cover and mount the soundproofing panel of the plastic panel. We check the correct assembly of all the pieces.


Posted on 2 November 2023 by ScegliAuto

This video is currently unavailable


Replacement of the heat exchanger of the Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) Let's find out the main steps to disassemble and replace the oil cooler of the Alfa Romeo 147 1.9 JTDM. First of all we open the bonnet of our car an
How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos