Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Headlight Height on an Alfa Romeo GT

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

Video tutorial

Below are the instructions that will allow you to adjust the height of the front headlights on an Alfa Romeo GT. First, position yourself in front of a fixed reference point, preferably in low light; then open the engine bonnet and turn on the headlights, as shown in the video.

At this point, locate the adjustment screw for the front headlight, which is found at the top of the headlight; adjust both beams of light to the same level, finally completing the headlight height adjustment using the control located inside the vehicle.


Posted on 30 April 2026 by ScegliAuto


Related tutorials

Removing Front Headlight on Alfa Romeo GT
Removing Front Headlight on Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Removing the front headlight of the Alfa Romeo GT? Here’s how to remove it from above the front. Remove the front bumper to access the front headligh…
Replacement of the front headlight bulb of the Alfa Romeo GT.
Replacement of the front headlight bulb of the Alfa Romeo GT.
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Today we will discover the steps that will allow us to disassemble and replace the headlight bulb of the Alfa Romeo GT. First, let's open the car's h…
Replacing the Front Lights on an Alfa Romeo GT
Replacing the Front Lights on an Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Want to replace the front bulbs on an Alfa Romeo GT? Let's see how to remove the headlight bulbs. Lift the bonnet, locate the rear of the front headl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos