|
Do it yourself
| |||
| ||||
How to Remove the Front Door Panel of an Alfa 147
Model: Alfa Romeo 147
MK 1
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
This video is currently unavailable
To remove the front door panel of an Alfa 147, start by unscrewing the screw located behind the door opening mechanism. To find the screw, remove the small plastic cover using a screwdriver. Remove the entire piece, being careful of the wires connected to the opening button. Once done, unscrew the screws located in the handle and the armrest. These can be found at the top of the handle, under the armrest (which holds the electric button block) and inside the hole left by it. Finally, unscrew the last screws located at the bottom, near the puddle light, and moving to the right along the panel's perimeter. At this point, unlock the clips using a small plastic pry tool found on the right and left sides of the panel. Pull the panel outwards and upwards, and remove the button while being careful to disconnect the power supply for the puddle light. To reassemble, simply reverse the steps taken.
Updated on 11 March 2026 by ScegliAuto
Related tutorials
Alfa Romeo 147
(2000-2010 /
MK 1)
In today's video, you will see how to remove and replace the front door panel of the Alfa Romeo 147, as well as the GT. First, open the front door an…
Alfa Romeo 147
(2000-2010 /
MK 1)
Today, we will explore the procedure for removing and replacing the door panel (both front and rear) on the Alfa Romeo 147. First, open the front doo…
Alfa Romeo 147
(2000-2010 /
MK 1)
Before starting, open the front door of your Alfa Romeo 147. Begin by uncliping and removing the window switch button, then disconnect the correspond…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |