Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wishbone on Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Control arm

In this video, you will learn how to replace the wishbone on the Alfa Romeo 159, which often fails. Open the bonnet and remove the suspension bolts: then unscrew the wheel bolts and lift the vehicle. At this point, remove the bolts for the suspension removal. Using a hydraulic jack, support the brake disc and proceed to disconnect and separate the wishbone by unscrewing the bolts. Then, use a lever to extract the wishbone and refit the new one. Clean the area thoroughly before reassembling everything and check all other components!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wishbone on My Alfa Romeo 159?
How to Replace the Wishbone on My Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) Wishbones are components subjected to significant stress and can wear out frequently. To replace the wishbone on your Alfa Romeo 159, first, open the…
How to Remove the Starter Motor from an Alfa Romeo 159?
How to Remove the Starter Motor from an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) Before you can begin, open the bonnet of your Alfa Romeo 159. Start by removing the hoses and collectors located above the starter motor by unscrewin…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos