Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Gt
    4. : Replacing the position light bulb in the Alfa GT / 47.

Alfa Romeo Alfa Romeo Gt - Video tutorial

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years 2003-2010
Part: Headlight bulb
Operation: Replacing the position light bulb in the Alfa GT / 47.

To replace the position light bulb in the Alfa Romeo GT / 147, we put the car, as usual, on a plane or on the deck to be able to work on it in a stable and safe manner. We open the hood of the engine compartment and remove the water and humidity protection cover from the headlight whose bulb we want to replace. We gently extract the attachment of the bulb to be replaced. We install the new bulb in place of the extracted one. If necessary, guide the bulb into the correct position with the other hand. We reassemble the protective cover and repeat the operation in the headlight on the other side.


Posted on 21 December 2023 by ScegliAuto

This video is currently unavailable


How do you replace the license plate bulb on an Alfa Romeo GT?
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In order to replace the license plate light bulb of the Alfa Romeo GT, you need to apply leverage with an object so that the corresponding light fixt
Replacement of the interior lights of the Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In today's video tutorial we will see how to remove and replace all the interior lights of the Alfa Romeo GT, but also of the 147. First of all, let'
How to replace the rear light bulb on Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) We see in this video the instructions to be able to remove and replace the rear light bulbs on an Alfa Romeo GT, but also on other models of the manu

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos