Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Universal Number Plate Holder on Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Video tutorial

Today, you will learn how to remove the universal number plate holder from an Alfa Romeo Mito; in fact, this tutorial can be applied to many types of cars as they almost all have the same type of number plate holder. First, unscrew the rear screws of the number plate (or if there are rivets, grind them down with a drill bit to remove them): next, remove the nut with the screw found in the number plate holder, which is usually secured at the back of the bumper.

Once removed, clean the area underneath and refit the new number plate holder, securing it with screws and nuts, then attach the number plate with rivets, as shown in the video.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulbs on an Alfa Romeo Mito
How to Replace the Number Plate Bulbs on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How do you replace the number plate bulbs on an Alfa Romeo Mito? Follow these steps: open the boot lid and using a screwdriver or plastic lever, remo…
How to Remove the Door Panel of the Alfa Romeo MiTo
How to Remove the Door Panel of the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) To remove the door panel of the Alfa Romeo MiTo, start by detaching the triangular cover near the external mirror. Next, loosen the screws located at…
Replacing the Number Plate Lights with LED on Alfa Romeo Mito
Replacing the Number Plate Lights with LED on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Replacing the number plate bulbs with LED types not only gives the vehicle a more modern and appealing look but also makes the number plate significa…

    Frequently Asked Questions

    • Mito 2008-2018 - Why doesn't Alfa Mito's DNA work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos