Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Lights with LED on Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

Video tutorial

Replacing the number plate bulbs with LED types not only gives the vehicle a more modern and appealing look but also makes the number plate significantly more visible. The bulb holder is located just above the number plate, nestled in the bumper trim and secured with a spring tab. Press the tab to retract it and remove the bulb holder from its position.

Twist the bulb holder to remove it and replace the bulb with the LED one. It is also possible to install the entire bulb holder equipped with a resistor to prevent the warning light from illuminating, connecting it with a specific plug directly into the bulb holder.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Install the LED Indicator Kit on an Alfa Romeo Mito
How to Install the LED Indicator Kit on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, you can see how to install the LED indicator kit on an Alfa Romeo Mito. For the installation, you will need a specific key fo…
Replacing Daytime Running Lights on Alfa Romeo Mito
Replacing Daytime Running Lights on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will learn how to replace the daytime running lights on the Alfa Romeo Mito. Note that the bulb in question is a 21W5 halogen dual…
How to Replace the Bulbs/LEDs in an Alfa Romeo Mito
How to Replace the Bulbs/LEDs in an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How do you replace the bulbs/LEDs located inside the ceiling light of an Alfa Romeo Mito? Using a screwdriver, pry between the ceiling light and the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos