Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the LED Indicator Kit on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side marker bulb

Video tutorial

In this video tutorial, you can see how to install the LED indicator kit on an Alfa Romeo Mito. For the installation, you will need a specific key for the Alfa Romeo Mito, but if you do not have the specific key, you can use a flat-head screwdriver to turn the bulb.

Once you locate the bulb, insert the appropriate key or a large flat screwdriver, then rotate and pull out the bulb (once you have turned the bulb holder, it is advisable to use pliers to extract it). Replace the old bulb with the new LED one, insert the bulb from inside the panel into the indicator hole, and once inserted, simply rotate to position it in the designated seat and then tighten with the screwdriver.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

What Bulbs Does the Alfa Mito Use?
What Bulbs Does the Alfa Mito Use?
Alfa Romeo Mito (2008-2018 / MK 1) The type of bulbs used in the Alfa Mito are as follows: H7 for the dipped beam, H7 for the main beam, and H1 for the fog lights. There are kits avail…
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, we will see how to replace the front bulbs of the Alfa Romeo MiTo. Specifically, we will install new, more efficient LED units. Fir…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos