Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Suspension Wishbone

Model: Alfa Romeo Gtv MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Control arm

Video tutorial

Lift the vehicle using a hydraulic lift, remove the wheel, brake caliper, and brake disc. Then, detach the suspension triangle mounting bolt from the hub and extract the ball joint using a pry bar. Remove the bolts securing the shock absorber to the hub and the axle nut from the hub, as well as the steering rack end. Next, slide the hub off the axle.

Remove the half-shell and then detach the bolts securing the wishbone flanges to remove it. Position the new wishbone by tightening the flange support bolts and proceed to reassemble in reverse order.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Seat of an Alfa Romeo Gtv
How to Remove the Front Seat of an Alfa Romeo Gtv
Alfa Romeo Gtv (1995-2004 / MK 1) Remove the front seat of an Alfa Romeo Gtv. First, move the seat back (using the electric buttons if available) and raise the seat base. Then, use a …
How to Remove the Front Driveshaft on the Alfa Romeo GTV
How to Remove the Front Driveshaft on the Alfa Romeo GTV
Alfa Romeo Gtv (1995-2004 / MK 1) In this video, you will see the procedure needed to remove and replace the front driveshaft on the Alfa Romeo GTV, following the instructions below. …
How to replace the battery of the Alfa Romeo GTV remote control?
How to replace the battery of the Alfa Romeo GTV remote control?
Alfa Romeo Gtv (1995-2004 / MK 1) In this tutorial, we will see how to replace the battery of the Alfa Romeo GTV remote, a very simple and quick operation. To do this, we will need a …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos