|
Do it yourself
| |||
| ||||
Guide to Bearing Replacement and Brake Disc Removal
Model: Alfa Romeo 156
MK 1
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
Let’s go through the steps to remove and install a new bearing. Lift the car with a jack on the relevant side, remove the wheel, and using two spanners, start to remove the brake caliper. Disconnect the brake wear sensor cable from its anchor point, and once free, open the caliper by flipping the lower part upwards. At this point, you can remove the disc. Then, using a 32mm spanner, undo the nut that holds the bearing in place; once removed, you can take it out. Now clean the seat with a wire brush, then place the new bearing in, pushing it fully to ensure it is seated correctly. Refit the washer and re-tighten the nut. Reattach the disc, close the brake caliper using a hammer, taking care not to damage it, then re-tighten the bolt that holds it in place and finish refitting the disc. Finally, mount the wheel and the job is complete.
Updated on 1 February 2026 by ScegliAuto
Related tutorials
Alfa Romeo 156
(1997-2007 /
MK 1)
How to replace the brake pads on an Alfa Romeo 156? Let's look at removing the pads from a front brake disc. Position the car on a column lift and ra…
Alfa Romeo 156
(1997-2007 /
MK 1)
To replace the front brake pads on an Alfa Romeo 156, remove the bolts securing the wheel. Once the wheel is removed, you will have access to the cal…
Alfa Romeo 156
(1997-2007 /
MK 1)
Here’s how to replace the front brake pads on an Alfa Romeo. Lift the car on a column lift (jack) to the desired height, then remove the wheel (using…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
