Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Clutch on Alfa Romeo Mito 1.4 Petrol

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Clutch

In today's tutorial video, we will see the main steps on how to remove and replace the clutch of an Alfa Romeo Mito 1.4 Petrol. First, lift the vehicle with axle stands and remove the front wheels by unscrewing the bolts; then remove the central bar and take out the oil drain bolt, allowing it to flow into a container. At this point, disconnect the arm from the braking system by removing the pin, and then remove the drive shafts; now disconnect the battery terminals and remove the battery to take out the battery tray. Dismantle the gearbox and clutch, following the video until the end!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Mito (2008-2018 / MK 1) Today's guide will illustrate the procedure for removing and replacing the clutch on the Alfa Romeo Mito 1.4, following the instructions below. First…
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos