Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : What is the fuse scheme and where is the fuse box of an Alfa Romeo 159 located?

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Fuse box
Operation: What is the fuse scheme and where is the fuse box of an Alfa Romeo 159 located?

The attached video shows the positioning diagram of the fuses of our Alfa Romeo 159. Fuses are devices that prevent damage to the vehicle's electrical components, interrupting the electrical circuit in the event of a current overload or a short circuit. These fuses are grouped inside the fuse box, which in turn is located on the lower left side of the steering column. So let's start by sitting on the driver's seat of our Alfa Romeo 159. Once this is done, we will have to unscrew and remove the fixing screw of the fuse box cover, then remove the cover itself, and we will have reached the fuse box and the relative fuses.


Posted on 2 February 2024 by ScegliAuto

    Frequently Asked Questions

    • 159 2005-2011 - Where are the fuses of the Alfa Romeo 159 located? Read Answer
    • 159 2005-2011 - Where is the Alfa Romeo 159 cigarette lighter fuse located? Read Answer
    • 159 2005-2011 - Why don't the Alfa Romeo 159 parking sensors work? Read Answer
    • 159 2005-2011 - What is the car radio fuse in the Alfa Romeo 159? Read Answer
    • 159 2005-2011 - Where is the glow plug fuse located in the Alfa Romeo 159? Read Answer
    • 159 2005-2011 - Where is the resistor of the passenger compartment fan of the Alfa Romeo 159? Read Answer
    • 159 2005-2011 - Where is the Alfa Romeo 159 air conditioning fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos