Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper Motor from the Alfa Romeo MiTo?

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Windshield wipers

To remove the rear wiper motor from the Alfa Romeo MiTo, first remove the wiper blade. To do this, you need to take off the cover cap and, using a spanner, loosen the nut that secures the wiper blade to the motor shaft. Next, open the boot and remove the interior trim: this can be done after extracting all the fixing clips using a screwdriver. The rear wiper motor will now be accessible, and to remove it, you must disconnect its power cable and use a drill to remove the rivets anchoring it to the bodywork.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wiper Blade on an Alfa Romeo Mito?
How to Replace the Rear Wiper Blade on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) As the video author explains, there are two ways to replace the rear wiper blade on an Alfa Romeo Mito. The first method involves completely replacin…
How to Remove the Door Panel of the Alfa Romeo MiTo
How to Remove the Door Panel of the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) To remove the door panel of the Alfa Romeo MiTo, start by detaching the triangular cover near the external mirror. Next, loosen the screws located at…
How to Replace the Front Headlight Bulb on an Alfa Romeo MiTo?
How to Replace the Front Headlight Bulb on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the front headlight bulb on an Alfa Romeo MiTo, you need to unscrew the bolts located inside the wheel arch corresponding to the bulb bein…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos