Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How do you replace the rear wiper on the Alfa Romeo Mito?

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Windscreen wipers
Operation: How do you replace the rear wiper on the Alfa Romeo Mito?

As the author of the video explains, there are two ways to replace the rear wiper on an Alfa Romeo Mito. The first consists in the complete replacement of the affected part and which consists in lifting the plastic cap which covers the fixing pin, unscrewing the latter and removing the whole wiper arm to replace it with the new one. Alternatively we can limit ourselves to replacing only the brushes by purchasing a new original or compatible spare part, to be adapted if necessary by cutting it to the length we need. In this way we can limit ourselves to unhooking the old brush and installing the new one in its place.


Posted on 30 April 2023 by ScegliAuto



How to remove the rear wiper motor of the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In order to remove the rear wiper motor of the Alfa Romeo MiTo, the blade must first be removed. To do this, remove the bolt cap and, using a wrench,
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
Explanation of the operation of the Uconnect of the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) In this video we see how the Alfa Romeo MiTo Uconnect system works. The radio has both the possibility of being used with the touchscreen and with th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos