Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Window Regulator of an Alfa Romeo 156

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Side window

Video tutorial

This guide shows how to dismantle the electric window regulator of the Alfa Romeo 156. After removing the inner door panel on the side you are working on, proceed with the disassembly. To replace it, you need to remove the soundproofing panel without damaging it. Disconnect the glass clamp and remove it from the regulator.

With the glass pulled into the closed position, secure it with tape. Disconnect the power cable of the motor.

Unscrew the mounting bolts of the guide and motor using a 10 mm hex key. You can remove the window regulator by passing it through the lower hole. Lubricate all moving parts of the new unit and reinstall it in position.

Refit the mounting screws and reconnect the power cable of the motor. At this point, you can reattach the glass clamp to the regulator.

Check the correct operation of the part before refitting the soundproofing panel and the inner door panel. The operation is now complete.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of the Alfa Romeo 156
Removing the Door Panel of the Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Today, we will go through the steps to remove and replace the front door panel of the Alfa Romeo 156. First, open the front door and begin unscrewing…
How to Remove the Door Panel of an Alfa Romeo 156
How to Remove the Door Panel of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Replacing the panel on a 156? Let's look at removing the rear panel. Remove the screws inside the internal handle and take it off along with the wind…
How to Remove the Rear Door Panel on an Alfa Romeo 156?
How to Remove the Rear Door Panel on an Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In this tutorial, see how to remove the rear door panel on an Alfa Romeo 156, a very simple and quick operation. First, go inside the cabin, then unc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos