Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to remove the Blue & Me control unit from the Alfa Romeo Giulietta?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Control unit
Operation: How to remove the Blue & Me control unit from the Alfa Romeo Giulietta?

In order to remove the Blue & Me control unit, the entire front cover of the dashboard must be removed from the passenger side. After the dashboard has been removed, it will also be necessary to remove the glovebox located in its lower part, by unscrewing the special screws and unhooking the connectors. The control unit will be right in its rear part and can be removed from its housing by detaching the connector in its rear part. Once the old ECU has been removed, it can be replaced and the removed parts can be re-installed.


Posted on 14 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Giulietta 2010-2020 - Where is the Blue & me control unit of the Alfa Romeo Giulietta located? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos