Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Blue&Me Control Unit from the Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Control unit

To replace the Blue&Me control unit in the Alfa Romeo Giulietta, open the glove compartment on the passenger side and remove the screw located at the top. Next, using a lever tool, lift the grille on the dashboard. Underneath the grille, you will find the Blue&Me control unit, which can be slid out after disconnecting the connector. To disconnect it, you will need to remove the cover from the upper part of the glove compartment. Once the connector is removed, the control unit can be extracted and replaced with a new part.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) To remove the Blue&Me control unit, first remove the entire front cover of the dashboard from the passenger side. After the dashboard is removed, you…
Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will explain how to remove the Blue&Me module from an Alfa Romeo Giulietta car. To proceed with the removal of the module, first open the pa…
Alfa Romeo Giulietta (2010-2020 / MK 1) This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulie…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos