Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bulb of the Alfa Romeo MiTo?

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Light bulb

To replace the front bulb of the Alfa Romeo MiTo, open the bonnet to remove the circular protective cap located inside the lamp. Once removed, disconnect the connector attached to the bulb and take the bulb out of its housing. After the old bulb has been removed, connect the new replacement to the connector and insert it back into its housing. After installation, close the lamp with the appropriate cap and lower the bonnet, checking the correct operation of the bulb.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Alfa Romeo Mito
How to Replace the Headlight Bulb on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Below are the steps that will allow you to remove and replace the headlight bulb on the Alfa Romeo Mito, following the instructions provided. First, …
How to Change the Front Headlight Bulb on the Alfa Romeo Mito
How to Change the Front Headlight Bulb on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, you will learn how to remove and replace the front headlight bulb on the Alfa Romeo Mito, following the instructions below. F…
How do you replace the front headlight bulb of the Alfa Romeo MiTo?
How do you replace the front headlight bulb of the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) In order to replace the headlight bulb of the Alfa Romeo MiTo, you need to open the hood so that you can access the components located inside the eng…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos