Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 In this guide we will see the main instructions for disassembling and replacing the lock and the door handle of an Alfa Romeo 147. First we open the rear door and we go to disassemble the door panel, removing the plastic parts and unscrewing all the screws. fastening; then disconnect the electrical connector on the back and the cable of the opening handle. At this point we are going to unscrew the side screws with a torx screwdriver and extract the lock; we just have to replace it and reassemble the new one, following the video tutorial to the end!
Posted on 27 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |