Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Center console tunnel

Video tutorial

In this tutorial, you will learn how to remove the centre console of the Alfa Romeo Giulietta, following the instructions below. First, get inside the vehicle and start by prying on the sides of the rear plastic of the centre console to remove the air vent; then unscrew the screws found underneath, as illustrated in the video.

At this point, remove the handbrake cover and detach the side plastics; finally, completely remove the centre console from the vehicle, replacing it with the new one by applying the reverse procedure!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Dismantling Centre Console on Alfa Romeo Giulietta
Dismantling Centre Console on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video tutorial, you will learn how to dismantle the centre console of an Alfa Romeo Giulietta. Get inside the vehicle and first remove the…
Removing the Stereo from an Alfa Romeo Giulietta
Removing the Stereo from an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Remove the stereo from an Alfa Romeo Giulietta. Use a plastic lever to detach the trim around the stereo (where the air vents are located) from the c…
Dismantling the Tunnel and Centre Console of the Alfa Romeo Giulietta
Dismantling the Tunnel and Centre Console of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide provides instructions for dismantling the centre console and tunnel of the Alfa Romeo Giulietta. First, get inside the vehicle and remove …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos