Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Roof Lining of the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Video tutorial

In this guide, follow the main instructions to remove the roof lining of the Alfa Romeo Mito. First, get inside the vehicle and start by removing the interior light fittings, prising them off from the sides. Next, remove the plastic caps found at the back and detach the sun visors and grab handles, then take off the plastic side pillars as shown in the video.

At this point, begin to unclip the roof lining from the rear until it is completely removed, ready to be replaced with a new one!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Bulbs/LEDs in an Alfa Romeo Mito
How to Replace the Bulbs/LEDs in an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How do you replace the bulbs/LEDs located inside the ceiling light of an Alfa Romeo Mito? Using a screwdriver, pry between the ceiling light and the …
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Replace Damaged Bulbs in the Ceiling Light of an Alfa Romeo Mito
How to Replace Damaged Bulbs in the Ceiling Light of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Replace the damaged bulbs in the ceiling light of an Alfa Romeo Mito: use a screwdriver to pry between the ceiling light and the headlining panel (wi…

    Frequently Asked Questions

    • Mito 2008-2018 - Why doesn't Alfa Mito's DNA work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos