Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Interior Light in an Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Interior dome light bulb

As shown in this tutorial, removing the rear interior light in an Alfa Romeo 147 to replace a faulty bulb is a very simple and quick operation. To do this, grasp the light on the right side when viewed from the front and pull it downwards. If necessary, use a flathead screwdriver or, better yet, a plastic spatula to avoid causing damage. Once removed from its housing, you can take out the faulty bulb and insert the replacement, preferably an LED type.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Interior Light Fitting in an Alfa Romeo 147
Removing the Interior Light Fitting in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this guide, learn how to remove the interior light fitting of an Alfa Romeo 147. To do this, lever on the edges of the light fitting with a flat, …
How to Remove the Radio Antenna of an Alfa Romeo 147
How to Remove the Radio Antenna of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before you begin, sit in the back seat of your Alfa Romeo 147. Start by unclipping and removing the rear service light, then disconnect the associate…
How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos