Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 Let's see how the fuses of the Alfa Romeo 147 are replaced, in particular the fuses of the rear stop and the front fog lights. We find the first fuse box in the engine compartment next to the battery, take the fuse to be replaced with pliers, extract it, check if it needs to be changed (if the fuse jumper is intact, the fuse is good, instead if the jumper of the fuse is broken the fuse needs to be changed), take the new fuse, remove it from the package and put it in the same place where the old one was and with the same amperage. We find another fuse box in the dashboard, with a special key we remove the protection located in the lower part of the steering wheel, unscrew the screws, lower it, find the fuse to change, remove it, check if it needs to be changed (if the fuse bridge is intact, the fuse is good, instead if the fuse bridge is broken, the fuse must be changed). We take the new fuse, take it out of the box and put it in the same place where the old one was and of the same amperage.
Posted on 3 December 2022 by ScegliAuto
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m
Where are the instrument cluster fuses located in the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) In the event that the instrument cluster of our Alfa Romeo 147 suddenly stops working, the first thing we can do is check the state of the respective
Where are the fuses and the OBD socket in the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's video we see where the internal fuses and the OBD socket are located in the Alfa Romeo 147. First of all, the complete diagram can be foun Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.130
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |