Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Where are the instrument cluster fuses located in the Alfa Romeo 147?

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Instrument cluster
Operation: Where are the instrument cluster fuses located in the Alfa Romeo 147?

In the event that the instrument cluster of our Alfa Romeo 147 suddenly stops working, the first thing we can do is check the state of the respective fuses whose location is shown in this video. As we can see, there are two fuses and they are both located in the box located inside the passenger compartment, under the dashboard on the driver's side. They are labeled with the initials F37 and F53 and their amperage is 10A. If faulty, make sure you always use spare parts with the same specifications so as not to cause any damage to the various connected devices.


Posted on 15 December 2022 by ScegliAuto

This video is currently unavailable


Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m
How to remove the instrument panel on the Alfa Romeo 147 - GT
Alfa Romeo 147 (2000-2010 / MK 1) Let's find out in this guide how to remove the instrument cluster on the Alfa Romeo 147, but also on the GT, in simple and quick steps. First of all
Alfa Romeo 147 - GT service warning light reset
Alfa Romeo 147 (2000-2010 / MK 1) Let's see in this guide the main instructions to be able to reset the service spy of the Alfa Romeo 147, but also of the GT. First of all, we get on

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos