Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the rear light bulb on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Rear light bulb
Operation: How to replace the rear light bulb on Alfa Romeo 147

Today we will see, in this video tutorial, how to remove and replace the rear light bulbs, and in particular the stop light, of the Alfa Romeo 147. First we open the tailgate and start by removing the carpet covering that we find behind the light. ; then let's unscrew the screws to extract the light from the outside, as shown in the video. At this point we disconnect the electrical connector of the bulbs to access the lamp holder; remove the old stop bulb and replace it with the new one, with the same attack. So let's reassemble the headlight!


Posted on 14 August 2022 by ScegliAuto



How to remove the rear ceiling light in the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) As we can see in this tutorial, disassembling the rear ceiling light in the Alfa Romeo 147, in order to replace the faulty bulb, for example, is an e
How to change the reverse light bulb on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's see how to change the reverse light bulb of the Alfa Romeo 147: you will need a 10mm wrench. There are two bolts, one towards the outer side of
Replacement of Alfa Romeo 147 front bulbs
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial we will see how to replace the bulbs of the Alfa Romeo 147. First we open the bonnet: to access the bulb, you don't have to di

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos