Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on Alfa Romeo and Fiat Engines

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Service warning light

In this video tutorial, you can see how to reset the service light on 1.3 and 1.6 Multijet FIAT, LANCIA, and ALFA ROMEO engines by following a few simple steps for proper vehicle management, working independently. Enter the vehicle, press and hold the accelerator pedal fully without releasing it, while pressing the brake pedal seven times. Hold the accelerator pedal for 0 seconds. Once the reset is completed, the message "Oil reset complete" will appear on the instrument panel. Turn off and restart the vehicle to check if the light is off and if the process was successful.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on an Alfa Romeo Mito
How to Reset the Oil Light on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) If you want to know how to reset the oil change warning light on your Alfa Romeo Mito, simply read this guide carefully and follow the instructions. …
How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
Alfa Romeo Mito (2008-2018 / MK 1) After completing a full service with oil and filter replacement, it is important to reset the oil warning light; otherwise, the car will continue to …
How to Change the Gear Oil on an Alfa Romeo Mito
How to Change the Gear Oil on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, you will learn how to change the transmission oil on an Alfa Romeo Mito by following the instructions below. First, lift the vehicl…

Other guides you may be interested in

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos