Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the arms of the Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Arm
Operation: How to replace the arms of the Alfa Romeo 147

In today's video we see how to replace the arms of the Alfa Romeo 147. First we lift the car on the bridge. We then proceed by unscrewing the wheel bolts and then removing the fixing bolts. We clean the fixing elements of the arm and then we disconnect from its seat. We then remove the arm and install the new piece. We screw the fasteners that connect the control arm to the subframe. We mount the fixing bolt and check the arm. We remove the support from under the arm. We tighten the nut of the driveshaft. Finally we tighten the wheel bolts and we are done.


Posted on 27 October 2022 by ScegliAuto

    Frequently Asked Questions

    • 147 2000-2010 - How long do the Alfa Romeo 147 arms last? Read Answer
    • 147 2000-2010 - How much does it cost to replace the arms in the Alfa Romeo 147? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos