Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Electric Lock on the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door lock

Video tutorial

To replace the electric lock on the Alfa Romeo Mito, produced from 2008 to 2018, you need to: remove the plastic handle of the inner door by detaching the two covers and the four screws, unscrew the two side screws of the panel, and finally remove the panel to access the lock.

Once the panel is removed, take out the three side screws that secure the lock, disconnect the connectors, and pull it out of its housing.

Now you can proceed to install the new lock. Start by connecting the connectors and reinserting the lock into its housing, which will then be secured with the screws.

Refit the door panel and close the door.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Replacing the Boot Button on the Alfa Romeo Mito
Replacing the Boot Button on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, we will see how to remove and replace the boot opening and closing button on the Alfa Romeo Mito in simple steps. First, open…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Remove the External Handle on an Alfa Romeo MiTo?
How to Remove the External Handle on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To remove the external handle on an Alfa Romeo MiTo, open the door so you can detach the circular cover on the side of the door. Once this small cove…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos