Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to replace the lambda probe

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Lambda sensor
Operation: How to replace the lambda probe

The video shows the operations to be carried out to replace the lambda probe, a component that controls the exhaust gas to send feedback to the engine control unit and thus regulate the flow of fuel. Our car will be placed on a stand in order to allow us to operate on the probe and remove it from its seat, this after having disconnected the connection cable in the engine compartment. For the whole execution, only a wrench and a cable will be needed to recover the connector of the new probe, which will be connected to the upper part of the engine compartment. The procedure is illustrated on an Alfa Romeo 156 1.8 TS 16V.


Posted on 23 June 2023 by ScegliAuto



Lambda probe replacement Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Here are the operations to carry out to replace the lambda probe on the Alfa Romeo 156. This is a component that controls the exhaust gas to send fee
Replacing the timing belt
Alfa Romeo 156 (1997-2007 / MK 1) The timing belt itself has a moderate cost, but usually when you replace the belt you take the opportunity to replace a whole series of components co
How to replace the headlight bulb on the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 156 you have to open the hood, so that you can unscrew the fixing bolts that secure the head

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos