Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gearbox Oil in an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Transmission

In today's video, you will see how to service the manual gearbox in an Alfa Romeo Giulietta. First, lift your vehicle on a ramp for easy access. Once you locate the breather plug, position a fluid collection tray underneath. At this point, you can open the plug and let the used oil drain out; after a few minutes, the operation will be complete. Next, after refitting the plug, insert the new oil into the designated container located in the engine compartment of the vehicle and finish the job.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…
How to Set the Time on an Alfa Romeo Giulietta
How to Set the Time on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulie…

    Frequently Asked Questions

    • Giulietta 2010-2020 - How much does it cost to replace the gear lever position sensor in the Alfa Romeo Giulietta? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos