Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 If engine starting problems occur, it is likely that there is a fuel supply problem caused by a malfunction of the low pressure pump, the one immersed in the tank; to be able to disassemble it, the rear seat must be removed by simply pulling it upwards; at this point you can access the pump housing: remove the protective plastic cover, disconnect the socket and the pipes and then unscrew the plastic ring nut that fixes the pump flange to the tank and then extract it paying attention to fuel leaks.
Posted on 5 September 2023 by ScegliAuto
Other guides that may interest you
|
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.036
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |