Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Quick assembly of snow chains

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Snow chains
Operation: Quick assembly of snow chains

Snow is not a problem for mobility, just have good chains and common sense when driving, let's see how to install them in a short time. Most of the time it happens to have to mount the chains on the street while it is snowing, so we recommend that you first try several times in the garage to put them on and take them off so that when we need them we will be able to install them easily. First of all, especially if it is not the first time we use them, we free the chains from probable knots that are going to be created, once they are ordered as you can see in the video, let them pass their length behind the tire with the part rigid blue parallel to the wheel, nor do we take the 2 ends, close them at the top, right above the wheel and push the blue ring that has been created beyond the wheel. At this point we hook the chain in the points shown in the video guide, and finally we anchor the hook connected to the yellow rubber part at the farthest point where we can position it. We drive the car a few meters, unhook the hook we are talking about above, free the chain from the plastic hooks and pull it hard, at this point we pass it back into the hooks and anchor it in the furthest possible point.


Posted on 18 June 2023 by ScegliAuto

This video is currently unavailable

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos