Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to change the brake discs of the Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Brake discs
Operation: How to change the brake discs of the Alfa Romeo Giulietta

When a sort of tooth forms on the edge of the brake disc, it means that the disc has worn out: a reduction in thickness means less braking capacity as the disc tends to overheat more quickly; replacing the discs obviously also requires the replacement of the relative pads; lift the car, remove the wheel, the brake calliper and the relative support; unscrew the fixing screw of the disc on the hub, brush and grease the hub itself before installing the new disc and then reassemble the support, new pads and the caliper; during this maintenance it is a good choice to use so-called slotted and perforated discs: they will dissipate heat better and guarantee better braking.


Posted on 22 September 2023 by ScegliAuto



Replacement of the rear brake discs of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Let's find out in this guide how to disassemble and replace the rear brake discs and pads of the Alfa Romeo Giulietta, in simple steps. First of all,
How to replace the front brake discs and pads of the Alfa Romeo Giulietta.
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, we will see how to disassemble and replace the entire braking system, as well as the front brake discs and pads, of the Alfa
How to reset the oil change light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, we will have to sit on the driver's seat of our Alfa Romeo Giulietta. So let's start by inserting and turning the key in the ignitio

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos