Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Aprilia Shiver

Model: Aprilia Shiver
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Aprilia Shiver, lift the rear part of the seat to gain access to the components underneath: this will allow access to the screws that secure the number plate holder and the rear light. By unscrewing these screws, you can remove these two parts along with the corresponding exhaust cover: the exhaust can now be slid out of its housing by unscrewing the bolts that secure it and loosening the clamp that connects it to the remaining exhaust pipe.

At this point, you can insert the new exhaust and reassemble all previously removed components.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Service Light Reset on an Aprilia Shiver
Service Light Reset on an Aprilia Shiver
Shiver To reset the service light on an Aprilia Shiver, use the lever on the left side of the handlebars to enter the menu displayed on the screen. Select t…
How to Change the Engine Oil on an Aprilia Shiver
How to Change the Engine Oil on an Aprilia Shiver
Shiver It is advisable to perform this operation with the engine slightly warm. Start by placing your Aprilia Shiver on a motorcycle stand. Next, unscrew th…
How to Replace the Lambda Sensor on an Aprilia Shiver?
How to Replace the Lambda Sensor on an Aprilia Shiver?
Shiver To replace the lambda sensor on an Aprilia Shiver, first disconnect the connector related to it, which is located on the right side of the bike. Once…

How to Replace the Headlight Bulb on the KTM Duke 200?

The headlight bulb on the KTM Duke 200 can be replaced by loosening the screws that secure the optical unit to its housing at the front of the motorcycle: once all these screws have been loosened, it will be possible to remove the optical unit from its housing and thus remove the protective cover found inside. At this point, you can pull out the bulb from inside the headlight, replacing it with a new spare part. After the replacement, you can insert the headlight back into its housing, securing it with the appropriate screws.

Watch the video!


by ScegliAuto

More videos