Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A5
    4. : Engine oil

Audi A5 - Engine oil

Engine Oil Audi A5 (2007-2016 / 8t8, 8t3, 8t, 8 f)

Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F)
Replacement of the motor oil and oil filter of the Audi A5 3.0 TDI V6.
These short and simple instructions will show us how to replace the motor oil and oil filter of the Audi A5 3.0 TDI V6. First, lift the car and start …Read all…
Posted on 6 July 2024 by ScegliAuto
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F)
How to check the engine oil level in the Audi A5?
In this tutorial, you can see how to check the engine oil level in the Audi A5, a very simple and quick operation. In this model, there is no classic dipstick …Read all…
Posted on 18 September 2026 by ScegliAuto
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F)
Replacement of Engine Oil
Changing the oil is very important to avoid problems with your car, so you should constantly check the oil level. To change it, lift the car with a jack and …Read all…
Posted on 18 February 2026 by ScegliAuto
Airbag (1) Car stereo (3) Battery (5) Transmission (2) Convertible top (1) Body (3) Wheel rim (1) Key (15) Timing belt (3) Onboard computer (3) Checks and maintenance (8) Headlight (3) Tail light (4) Fog lights (1) Cabin air filter (4) Light bulb (1) Headlight bulb (6) Handle (4) Starter motor (1) Transmission fluid (1) Engine oil (3) Clock (3) Door trim panel (5) Front bumper (4) Pump (1) Fuel pump (1) Push button (1) Fuse box (22) Seat (3) Door lock (1) Side mirror (5) AdBlue warning light (3) Warning light – error code (6) (14) Tire pressure warning light (1) Service warning light (21) Fuel cap (5) Center console tunnel (1) Blower motor (1) Side window (1)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos