Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external rearview mirror of the Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Side mirror

The main steps outlined in this guide will show us how to disassemble and replace the external rearview mirror of the Audi A4. First, we open the front door of the vehicle and start to disassemble and remove the door panel, unscrewing all the fixing screws; then we unscrew the fixing screws located behind the mirror, disconnecting the electrical connector for the glass adjustment, as shown in the video. At this point, we remove the mirror from the outside and replace it with the new one, fixing it properly and finally adjusting the glass!

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to close the external rearview mirror of the Audi A4
How to close the external rearview mirror of the Audi A4
Audi A4 (2007-2016 / B8) The instructions in this guide will show us how to close and open the external rearview mirrors of the Audi A4. First, we get into the car and start …
How to Replace the Outside Rearview Mirror on an Audi A4
How to Replace the Outside Rearview Mirror on an Audi A4
Audi A4 (2004-2008 / B7) In today's tutorial video, you will see the main instructions on how to remove and replace the outside rearview mirror on an Audi A4. First, open the…
Replace Side Mirror on Audi A4
Replace Side Mirror on Audi A4
Audi A4 (2007-2016 / B8) Is the exterior mirror on your Audi A4 broken? Want to replace it? Here's how to proceed. Use a plastic lever to detach the mirror. With an appropria…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos